Firewood cost, either you bought them or you chopped them
yourself. In the former you shelled out your hard earned money and in the
latter you spent a lot of energy and time. So if your firewood gets wet or
becomes filled with moisture, all your money and your efforts will just go down
the drain. A wet firewood will not burn properly as we all know, and if you
live in an area where rain and snowfall is frequent, it can be virtually
impossible to keep your wood dry. Building a firewood shed is the key to this
predicament and you can be sure of having dry firewood every time you need it.
The location of your firewood shed is one of the most
important decision you should make It should be in an area where water does not
pool around the shed, yet it should be near your home so that it would be easy
for you to get firewood whenever you need it. You certainly wouldn’t want to
walk far just to get some when it’s raining hard or there is heavy snowfall.
Also, try to build a raised floor so that moisture from the ground would not
easily seep inside the shed. Wet wood easily gets rotten and decomposes.
With regards to the roof of your firewood shed, you should
make sure in your plans that it has a high steep and is slanted. This way, snow
and rain will easily slide off and would not get inside to the firewood. This
goes the same for the foundation, making it higher from the ground and
providing a slant to slide snow and water away from the shed.
Most firewood sheds are built with only three sides. Only
three walls are provided and the fourth side left open. This is necessary as
this allows airflow which in turn allows the firewood to dry properly. But
because of this open side, it would also be easy for rain and snow to be blown
inside by the wind. To avoid this or to minimize moisture, it is best that the
open side should not face the direction of the wind.
To further prevent moisture from seeping into your firewood,
you should put a layer of plastic on the floor and to allow good airflow for
drying, under your woodpile stack your firewood on off-cut lumbers. Most firewood
shed are not really that big, they are easy to make and don’t require as much
cost as most typical storage sheds. With just a couple of lumber and nails, you
can be assured that you will have dry and effective firewood ready to build a
roaring fire for a comfortable warmth.
Always remember that in starting any project, having plans
is the best way to ensure that you will have a worry-free time when you’re in
the actual process of building the shed. So get your hands on a firewood shed