|
For just a few dollars
you can quickly build this combination unit that will join
ferrous metals and is cool enough for stainless steel.
As a spot welder, this combination unit will join ferrous
metals up to 3/32 in. thick. It works especially well on
stainless steel due to low heat and electrical conductivity
of this metal. For heavier work it is used as an arc welder.
A carbon-arc torch may be plugged in and used for brazing,
silver soldering, aluminum welding and welding thin sheet
metal as well as heating metals for bending. The voltage
booster can be used to eliminate power-robbing voltage drop
when portable electric tools and equipment must be used on a
long extension cord. The voltage booster requires no extra
coils, only a switch and receptacle connected into the
circuit.
This workshop tool plan contains
detailed step by step instructions with illustrations on how to complete
this project.
This workshop wood or tooling do it
yourself plan can be downloaded
immediately after purchase. If you have any questions about how
the download process works, please visit our
download help page. This
particular wood or tool instructional plan is also included in our as part of our
complete
workshop wood plan package. If you purchase our complete
workshop
plan package, you will find this plan as part of that set. This
plan is intended to give our customers a preview of the workshop plan
package before they purchase it. Many of these plans are in
instructional format or article format, but they all accomplish their
goal of explaining to the user on how to successfully build the project
described.
Our Wood Plans
and Tooling Plans can be immediately downloaded after
purchase. All plans are in PDF format.
|
