(SAMPLE PAGE VIEWS)



















|
All books are in PDF
format, for easy searching and printing This is a collection of
over 210 books and publications
that cover the topic of metal and iron. This disk is
remains the best selling reference collection ever put together on one
DVD on this topic. The titles included are as follows:
Alloys:
A Treatise on Steel
- Its Theory, Metallurgy, Properties, Practical Working & Use,
M. H. C. Landrin, 1868, 375 pages
A Treatise on the Metallurgy of Iron,
by H. Bauerman, 1882, 588 pages
Alloy Steels, E. F. Lake,
1914, 54 pages
An Outline of the Metallurgy of Iron & Steel,
A. H. Sexton & J. S. G. Primrose, 1912,
600 pages
Carbon & Alloy Tool Steels,
Ludlum, 1918, 168 pages
Elementary Practical Metallurgy,
by P. Longmuir, 1905, 328 pages
High Speed Carbon and Alloy Tool Steels, Non-Corrosive Iron and Steel,
Ludlum, 1924, 209 pages
High-Speed & Carbon Tool Steels, Machinery Rreference Sseries,
1914, 49 pages
High-Speed Steel, O. M.
Becker, 1910, 375 pages
Iron & Steel, E. Oberg,
1910, 56 pages
Iron, Steel & Other Alloys,
H. M. Howe, 1906, 529 pages
Manufacture & Uses of Alloy Steels,
H. D. Hibbard, 1919, 116 pages
Metal Properties, Characteristics, Uses & Codes,
US Army, 1974, 93 pages
Points for Buyers & Users of Tool Steel,
G. W. Alling, 1903, 268 pages
Practical Alloying, J.
Buchanam, 1910, 233 pages
Practical Guide for the Manufacture of Metallic Alloys,
A. Guetier, 1872, 335 pages
Shop Handbook of Alloy Steels,
G. Van Dyke, 1921, 98 pages
Tests of High-Speed Tool Steels on Cast Iron,
L. P. Breckenridge & H. B. Dirks, 1905, 65 pages
The Metallic Alloys - A Practical Guide,
W. T. Brannt, 1896, 602 pages
Tool Steel, Its Uses and Treatment For the Practical Mechanic,
Bourne-Fuller, 1921, 69 pages
Tool Steel, O. Thallner,
1902, 242 pages
Blast
Furnace:
A Study of the
Blast Furnace, Harbison-Walker,
1911, 180 pages
A Study of the Open Hearth Furnace,
Harbison-Walker, 1909, 98 pages
Blast-Furnace Construction in America,
J. E. Johnson, 1917, 437 pages
Models of Blast Furnaces for Smelting Iron,
H. W. Nichols, 1922, 22 pages
Studies of Blast Furnace Phenomena,
M. L. Gruner, 1874, 221 pages
The Blast Furnace & The Manufacture of Pig Iron,
R. Forsythe, 1913, 371 pages
The Principles, Operation & Products of the Blast Furnace,
J. E. Johnson, 1918, 588 pages
Cupola
Furnace:
System of Foundry
Practice - Cupola Practice,
by E. Kirk, 1921, 236 pages
The Cupola Furnace, A Practical Treatise on the Construction &
Management, by E. Kirk,
1903, 430 pages
Electric
Furnace:
Chemical Arithmetic & Calculation of Furnace Charges,
R. Chauvenet, 1912, 331 pages
Electric Furnaces in the Iron & Steel Industry,
W. Rodenhauser, I. Schoenawa & C. H. Von
Baur, 1920, 488 pages
The Electric Furnace - Its Evolution, Theory & Practice,
A. Stansfield, 1907, 233 pages
The Electric Furnace - Its Construction, Operation & Uses,
A. Stansfield, 1914, 439 pages
The Electric Furnace, H.
Moissan, 1904, 329 pages
The Electric Furnace, J. N.
Pring, 1921, 555 pages
The Electro-Metallurgy of Steel,
C. C. Gow, 1922, 398 pages
Electrometallurgy:
A Manual of
Electrometallurgy, J.
Napier, 1860, 184 pages
A Treatise on Electro-Metallurgy, Embracing the Application of
Electrolysis, by W.
McMillan, 1891, 405 pages
Contribution Towards A History Of Electro-Metallurgy,
by H. Dircks, 1863, 133 pages
Electrometallurgy Practically Treated,
A. Watt, 1883, 315 pages
Electrometallurgy, J. R. C.
Kershaw, 1908, 336 pages
Elements of Electrometallurgy,
A. Smee, 1843, 375 pages
Industrial Electrometallurgy, Including Electrolytic and Electrothermal
Processes, by E. Rideal,
1918, 304 pages
The Art of Electrometallurgy,
G. Gore, 1887, 425 pages
The Electro-Metallurgy of Steel,
by C.C. Gow, 1922, 399
pages
The Electro-Platers Handbook, A Practical Manual for Amateurs and
Students in Electrometallurgy,
by G.E. Bonney, 1905, 260 pages
The Practical Metal-Worker's Assistant with the Application of the Art
of Electrometallurgy, by O.
Byrne, 1864, 678 pages
Forging:
Bolt,
Nut & Rivet Forging, by D. T.
Hamilton, 1914, 52 pages
Drop Forging, Die Sinking & Machine Forming of Steel,
by J. V. Woodworth, 1911, 373 pages
Drop forging, by E.H.
McClintock, c1910, 61 pages
Drop-Forging Dies & Die-Sinking,
by C. L. Lucas & J. W. Johnson, 1913, 61
pages
Drop-Forgings, by Williams &
Co, 10th ed., 1901, 82 pages
Elementary Forge Practice,
by
R. H. Harcourt, 1917, 154 pages
Elementary Forge Practice,
by
R. H. Harcourt, 1920, 165 pages
First Lessons in Metal-Working,
by
A. G. Compton, 1890, 185 pages
Forge Note Book, by G. J.
Coleman, 1921, 33 pages
Forge Practice and Heat Treatment of Steel,
by J Bacon, 1919, 441 pages
Forge Practice Elementary,
by J Bacon, 1908, 297 pages
Forge Work, by W. L. Ilgen,
1912, 230 pages
Forgecraft, by C. P. Crowe,
1913, 192 pages
Forging of Iron & Steel,
by W.
A. Richards, 1915, 280 pages
Forging Operations, ITC,
1916, 181 pages
Forging, by J. Jernberg, 1919,
152 pages
Forging, by J. L. Bacon, 1906,
110 pages
Foundry Appliances, Blacksmith-Shop Equipment, Iron Forging, Steel
Treatment, etc, ILT, 1906,
680 pages
Foundry Work, by B. Gray,
1918, 228 pages
Hand Forging & Wrought Iron Ornamental Work,
by T. F. Googerty, 1911, 204 pages
High-Explosive Shell Manufacture,
by
D. T. Hamilton, 1916, 245 pages
Machine Forging, by D. T.
Hamilton, 1914, 41 pages
Machine Forging, by D. T.
Hamilton, 1921, 118 pages
Notes for Forge Shop Practice,
by J. D. Littlefield, 1910, 76 pages
Practical Forging & Art Smithing,
by T. F. Googerty, 1915, 151 pages
The Forging of Eye Bars & the Flow of Metal in Closed Dies,
by H. V. Loss, 1893, 38 pages
Foundry:
A
Practical Treatise on Foundry Irons,
by E. Kirk, 1911, 334 pages
A Text-Book of Elementary Foundry Practice,
by W. A. Richards, 1910, 147 pages
American Foundry Practice, Part 1-Loam, Dry Sand & Green Molding,
by T.
D. West, 1900, 446 pages
American Foundry Practice, Part 2-Molders Textbook,
by T. D.
West, 1894, 521 pages
Cast Iron Pipe - Standard Dimensions & Weights,
by US Cast Iron Pipe & Foundry Co., 1906, 163
pages
Converter Steel Foundry Practice,
by H. G. Mouat, 1920, 162 pages
Foundry Blackings, by R.
Moldenke, 1920, 33 pages
Foundry Molding Machines & Pattern Equipment,
by E. S. Carman, 1920, 241 pages
Foundry Nomenclature, by J. F.
Buchanan, 1903, 242 pages
Foundry Practice - A Treatise on Molding & Casting,
by J. M. Tate & M. O. Stone, 1909, 247 pages
Foundry Practice, by R. H.
Palmer, 1929, 469 pages
Foundry Work - A Practical Handbook on Standard Foundry Practice,
by B. L Gray, 1918, 229 pages
Foundry Work, by R. E. Wendt,
1923, 221 pages
Foundry Work, Vol 1, by W. C.
Stimpson, 1906, 83 pages
Foundry Work, Vol 2, by W. C.
Stimpson, 1906, 85 pages
General Foundry Practice,
by
A. McWilliam & P. Longmuir, 1907, 461 pages
General Foundry Practice,
by
W. Roxburgh, 1910, 390 pages
Lectures on Iron Founding,
by
T. Turner, 1904, 183 pages
Machine Forging, Foundry Appliances, Iron Forging, Hardening &
Tempering, ICS, 1906, 679
pages
Manganese in the Foundry,
by
J. E. Cartwright, 1903, 28 pages
Modern Foundry Practice,
by J.
Sharp, 1900, 836 pages
Modern Iron Foundry Practice - Equipment, Materials & Processes,
by G. R. Bale, 1902, 403 pages
Molders' Textbook, by T. D.
West, 1888, 542 pages
Occurrence & Testing of Foundry Molding Sands,
by L. H. Cole, 1917, 44 pages
Pattern Making & Foundry Practice,
by L. H. Hand, 1905, 153 pages
Practical Brass & Iron Foundry,
by
J. Larkin, 1907, 460 pages
Practical Iron Founding,
by J.
G. Horner, 1914, 455 pages
Principles of Pattern Making,
by
J. G. Horner, 1900, 203 pages
Shop & Foundry Management,
by
S. Dean, 1913, 230 pages
Shop & Foundry Practice, Volume 1,
ITC, 1901, 538 pages
Shop & Foundry Practice, Volume 2,
ITC, 1901, 612 pages
Shop & Foundry Practice, Volume 3,
ITC, 1901, 721 pages
Shop & Foundry Practice, Volume 4,
ITC, 1901, 760 pages
Spent Foundry Sand - Alternative Uses Study, by J. Emery, 1993, 131 pages
The Cupola Furnace, by E.Kirk,
1910, 526 pages
The Encyclopedia of Founding,
by S. Bolland, 1894, 549 pages
The Founder's Manual, by D. W.
Payne, 1920, 695 pages
The Founding of Metals,
by
E.Kirk, 1877, 303 pages
The Iron-Founder - A Comprehensive Treatise on the Art of Molding,
by S. Bolland, 1893, 409 pages
The Iron-Founder Supplement - The Art of Casting on Iron,
by S. Bolland, 1893, 411 pages
The Molders's & Founder's Pocket Guide,
by
F. Overman, 1885, 381 pages
The Steel Foundry, by J. H.
Hall, 1922, 348 pages
Metallography
and Chemical Analysis:
A Practical Guide
to Iron & Steel Works Analyses,
by W. McFarlane, 1912, 204 pages
A Practical Manual of Chemical Analysis & Assaying as Applied to Iron,
Cast Iron, Wrought Iron & Steel,
by L. De Koninck & E.
Dietz, 1873, 310 pages
An Introduction to Metallography & Macrogaphy,
by L. Guillet & A. Portevin, 1921,
434 pages
An Introduction to the Study of Physical Metallurgy,
by W. Rosenhain, 1915, 461
pages
Assaying & Metallurgical Analysis,
by E. L. Rhead & A. H.
Sexton, 1902, 486 pages
Brief Course in Metallurgical Analysis,
by H. Ziegel, 1915,
86 pages
Foundry Chemistry,
by F. L. Crobaugh, 1904, 95
pages
Guide to A Course of Quantitative Chemical Analysis Especially for
Minerals & Furnace-Products,
by C. F. Rammersbeld, 1871,
250 pages
Introduction to Metallography,
by F. Ibbotson, 1908, 236
pages
Laboratory Notes on Iron & Steel Analyses,
by W. MacFarlane, 1909, 486
pages
Laboratory Notes on Practical Metallurgy,
by W. McFarlane, 1905, 160
pages
Metallography - An Introduction,
by A. L. Hiorns, 1902, 237
pages
Metallography Applied to Siderurgic Products,
by H. Savoia, 1910, 208
pages
Metallurgical Analysis & Assaying,
by W. A. MacLeod & C.
Walker, 1903, 406 pages
Metallurgical Analysis,
by N. W. Lord & D. J.
Demorest, 1916, 369 pages
Metallurgical Laboratory Notes,
by H. M. Howe, 1902, 163
pages
Metals- Their Properties & Treatment,
by A. K. Huntington & W. G.
McMillan, 1904, 584 pages
Methods for the Analysis of Ores, Pig Iron & Steel,
by F. C. Phillips Editor,
1908, 187 pages
Methods in Metallurgical Analysis,
by C. W. White, 1915, 241 pages
Modern Steel Analysis,
by J. A. Pickard, 1914, 144
pages
Notes on Metallurgical Analysis,
by N. W. Lord, 1903, 369
pages
Practical Methods for the Iron & Steel Chemist,
by J. K. Heess, 1908, 78
pages
Principles of Metallography,
by R. S. Williams, 1920,
180 pages
Quantitative Metallurgical Analysis,
by C. F. Sidener, 1904, 66
pages
Rapid Methods for Chemical Analysis of Special Steels,
by C. M. Johnson, 1920, 569
pages
Tables for Iron Analysis,
by J. A. Allen, 1896, 124
pages
Technical Methods of Ore Analysis,
by A. H. Low, 1919, 407 pages
The Analysis of Steel-Works Materials,
by F. Ibbotson, 1920, 309
pages
The Chemical & Metallographic Examination of Iron, Steel & Brass,
by W. T. Hall & R. S.
Williams, 1921, 515 pages
The Chemical Analysis of Iron,
by A. A. Blair, 1906, 337 pages
The Crystallization of Iron & Steel - An Introduction to the Study of
Metallography,
by J. W. Mellor, 1905, 241
pages
The Metal Mixer - Exact Method for Mixing Iron by Chemical Analysis,
by W. W. Ellis, 1919, 57 pages
The Metallography of Iron & Steel,
by A. Sauveur, 1912, 444
pages
The Metallography of Steel & Cast Iron,
by H. M. Howe, 1916, 719
pages
The Metallurgists' & Chemists' Handbook,
by D. M. Liddeli, 1918, 661
pages
The Sampling & Chemical Analysis of Iron ,
by O. Bauer & E. Deiss,
1915, 387 pages
Metallurgy:
A Practice Book of
Elementary Metallurgy, by E.
D. Thum, 1917, 332 pages
A Textbook of Elementary Metallurgy,
by A. H. Hiorns, 1888, 264 pages
A Treatise on Roll-Turning for the Manufacture of Iron,
by P. Tunner, 1869, 169 pages
A Treatise on Steel - Its Theory, Metallurgy, Properties, Practical
Working & Use, M. H. C.
Landrin, 1868, 375 pages
A Treatise on the Metallurgy of Iron,
by
H. Bauerman, 1890, 612 pages
An Elementary Text-Book of Metallurgy,
by A. H. Sexton, 1899, 286 pages
An Introduction to the Study of Metallurgy,
by W. C. Robert-Austen, 1910, 540 pages
An Outline of the Metallurgy of Iron & Steel Prepared for Students of
MIT, by H. O Hoffman, 1904,
661 pages
General Metallurgy, by H.O.
Hofman, 1913, 930 pages
Iron & Steel - A Treatise,
by E. Oberg & F. D. Jones, 1920, 344 pages
Iron & Steel - Their Production & Manufacture,
by
C. Hood, 1911, 214 pages
Iron & Steel, by O. F. Hudson
& G. D. Bengough, 1921, 189 pages
Iron & Steel, by W. H.
Greenwood, 1907, 520 pages
Iron, Its History, Properties, & Processes of Manufacture,
by W. Fairbaim, 1865, 332 pages
Mechanical Metallurgy, by G.
Dieter, 1961, 643 pages
Metal-Colouring and Bronzing,
by A.L Hiorns, 1892, 360 pages
Metallurgical Calculations, One Volume Edition, Parts I - III,
by J. W. Richards, 1918, 708 pages
Metallurgy - An Elementary Text-Book,
by
E. L. Rhead, 1907, 300 pages
Metallurgy - Iron & Steel,
by
J. Percy, 1864, 989 pages
Metallurgy of Cast Iron - A Complete Exposition,
by T. D. West, 1902, 654 pages
Practical Metallurgy - An Elementary Text-Book,
by A. R. Gower, 1902, 142 pages
Practical Metallurgy & Assaying,
by A. H. Hiorns, 1906, 491 pages
Principles of Metallurgy,
by
A.H. Hiorns, 1901, 400 pages
Steel & Iron for Advanced Students,
by A. H. Hiorns, 1903, 539 pages
Steel & Iron, by W. H.
Greenwood, 1902, 575 pages
The Manufacture & Properties of Iron & Steel,
by H. H. Campbell, 1907, 667 pages
The Manufacture of Iron & Steel - Steel Production,
by G. R. Bashforth, 1951, 476 pages
The Manufacture of Iron & Steel,
by H. R. Hearson, 1922, 125 pages
The Manufacture of Iron and Steel Tubes,
by E. Emarks, 1903, 175 pages
The Manufacture of Iron,
by F.
Overman, 1854, 504 pages
The Manufacture of Iron,
by M.
Needham, 1831, 39 pages
The Metallurgy of Iron & Steel,
by
B. Stoughton, 1911, 554 pages
The Metallurgy of Iron & Steel,by
T. Turner, 1895, 380 pages
The Metallurgy of Iron, by T.
Turner, 1908, 497 pages
The Metallurgy of Steel,
by H.
M. Howe, 1890, 419 pages
The Metallurgy of the Common Metals,
by L. S. Austin, 1921, 645 pages
The Principles & Practice of Iron & Steel Manufacture,
by
W. MacFarlane, 1917, 322 pages
Reference Books:
The Practical Metal
Worker's Assistant, by O.
Byrne, 1864, 678 pages
The Value of Science in the Smithy & Forge,
by W. H. Cathcart, 1916, 182 pages
Thermal Treatment:
Carbon Steel
Tensile Properties Below Thermal Critical Range,
by H. J. French, 1922, 63 pages
Composition & Heat Treatment of Steel,
by E. F. Blake, 1911, 270 pages
Elastic Properties of Nonferrous Metals & Steel under Deformation &
Heat, by R. W. Mebs & D. J.
McAdam, US Gov., 1947, 106 pages
Hardening & Tempering, E. R. Markham,
by W. J. Tood & W. A. Painter, 1912, 54 pages
Hardening, Tempering, Annealing & Forging of Steel, by J. V. Woodworth, 1903, 304 pages
Heat Treatment & Mechanical Properties of 1 Percent Carbon Steel,
by H. J. French & W. G. Johnson,
1922, 43 pages
Heat Treatment of Chrome Tungsten High Speed Tool Steels,
by H. Perlstein & D. B. Lesser, 1914, 123
pages
Heat Treatment of High Speed Steels,
by P. F. Miller & H. Bornstein, 1911, 97
pages
Heat Treatment of Soft & Medium Steels,
by F. Giolitti, 1921, 386 pages
Heat Treatment of Steel,
by R.
Badger, J. E. Storey & J. F. Sallows, 1910, 54 pages
Heat-Treatment of Steel, by E.
Oberg, 1920, 293 pages
Relation of the High-Temperature Treatment of High-Speed Steel to
Secondary Hardening & Red Hardness,
by
H. Scott, 1920, 30 pages
Scientific Method of Tempering Steel,
by
W. E. Everitt, 1917, 23 pages
Steel & Its Heat Treatment,
by D. K. Bullens, 1918, 504 pages
Steel Tensile Properties under Extreme Temperatures,
by H. C. Peterson & T. W. Hall, 1920, 113
pages
Steel Thermal Treatment, by J.
W. Urquhart, 1922, 360 pages
Tensile Properties of Structural Alloy Steel at High Temperatures,
by H. J. French, 1922, 20
pages
The Case-Hardening of Steel,
by H. Brearley, 1921, 225 pages
The Heat Treatment of Tool Steel,
by H. Brearley, 1911, 188 pages
The Making, Shaping & Treating of Steel,
by J. M. Camp & C. M. Francis, 1920, 663
pages
The Properties and Heat Treatment of High Speed Steel,
by H.Brauer, 1920, 71 pages
The Treatment of Steel,
Crucible Steel Co. of America, 1902, 180 pages
The Working of Steel - Annealing, Heat Treatment & Hardening of Carbon &
Alloy Steel, by F. H. Colvin &
K. A. Juthe, 1921, 264 pages
Vintage
Historical Texts:
A History of Bells
& Description of their Manufacture,
by Cassell, Petter & Galpin,
1900, 33 pages
Forges & Furnaces in the Province of Pennsylvania,
by Pennsylvania Soc. of
Colonial Dames of America, 1914, 328 pages
The Metal Trades,
by R. R. Lutz, 1916, 152
pages
|